3 Pipe Clamp Storage Ideas
You can never have enough clamps around the shop. Where to store them is another matter, however. Here are three simple ideas.
You can never have enough clamps around the shop. Where to store them is another matter, however. Here are three simple ideas:
Buy screw-on pipe caps to fit the diameter of the pipe, then drill a small hole, attach an eye bolt and nuts and screw on the cap. Then hang ’em from a hook or nail.
Or make a simple rack out of scrap wood. Cut the top edge at a 3-degree bevel to keep the pipe clamps from slipping off the rack.
Or buy these spring grip organizers, available at home centers, then screw them to a board. Position the board just high enough to hold the pipe near the crank end while the other end rests on the floor.