4 Favorite Pro Tips You Need to Know
When working on DIY projects, it helps to have pro friends that have time- and stress-saving tricks up their sleeves. These are four of our favorites.
Cut holes with drywall tools
Scribe holes with a drywall circle gauge, and then make the cuts with a drywall saw. With just these two tools, you can cut a wide variety of hole sizes. Learn how to install a suspended ceiling yourself.
Steel Stud Framing
Protect cords and yourself
When youre installing metal studs, accidentally stepping on an extension cord thats draped over a sharp track is a perfect way to cut your cord. To prevent this, take a scrap of track, flip it upside down and put it under the cord.
Dull blades are actually better for plastic pipe
A wood blade in a recip saw cuts much faster than a metal blade. But the big, aggressive teeth often grab hold of the pipe, rattling everything, including you. So save those dull blades for ABS and PVC.
Move one ring at a time
Figuring out the right combination of turns to get an elbow to point in the right direction can be perplexing. Try moving one gore (elbow ring) at a time, starting with the connected side. And dont make 90-degree turns if you dont have to. A 90-degree elbow creates the same resistance as adding 5 ft. of pipe.