Cannery Row Hardware Storage
Don’t recycle those steel or aluminum cans quite yet. Set aside a few months’ worth of cans and put these cannery rows to work organizing small hardware.
Image Credits:Family Handyman
Don’t recycle those steel or aluminum cans quite yet. Set aside a few months’ worth of fruit and coffee cans and put these cannery rows to work organizing all of the small hardware in your shop.
All you need are some homemade wood clips and a hunk of 3/4-in. plywood screwed to a wall. To make the clips, rip a 3/4-in.-thick board into 1-3/8-in.-wide strips. Saw or rout a 3/8-in. x 1/4-in. rabbet along one edge.
Drill 1/8-in. screw holes every 3/4 in. and then cut off 3/4-in.-wide clips. To mount the clips and cans on the plywood, screw on a clip, notch end down, then set a can on the clip and screw on a second clip overlapping the can’s rim about 1/4 in.
That’s it! Keep adding clips and cans until every screw, bolt, nail and nut has a can it can call home. Label the cans, and keep one loaded with surplus clips and screws for adding on. Thanks to Armand Bruggert for this tip.