Copy Center Project Patterns

Enlarging scaled-down woodworking patterns to full scale is a lot of work, and the results aren't accurate. But you dont have to go through that anymore.

Enlarging scaled-down woodworking patterns to full scale is a lot of work, and the results are rarely very accurate. But you dont have to go through that exercise anymore. Just about any full-service copy center will do it for you in a couple of minutes for a couple of dollars.

Heres how: Cut the pattern to the actual length of the drawingour magazine pattern measured 3-13/16 in. Ask to have it enlarged to the size called for in the dimensions. The copy center magician will spin a circular gauge to determine the expansion percentage and punch that info into the copier. In less than a minute, the full-size pattern will roll out. Our 35-3/4- in. Adirondack leg pattern cost less than $2. Stick the pattern directly to the wood with spray adhesive, double-faced tape or masking tape and cut out the partthats it! Thanks to furniture designer/builder Bruce Kieffer for this miraculous, timesaving tip.

Popular Videos

Woodworking plansFamily Handyman