Cordless drill-driver station
You won’t forget to charge your drills with this drill-driver station. Your drill-drivers will always be where you can find them.
Keep your cordless drills organized with a drill driver station
Reader A. Malcolm Sturm inspired this useful hangout for cordless drill-drivers. It stores them near their chargers so you won’t forget to charge them, and keeps them close at hand and ready to go. Best of all, with their own little eagle’s nest, your drill-drivers will always be where you can find them.
To make one, rip 3/4-in. plywood into 8-1/2-in.- wide strips. Make your drill-driver station wide enough to hold all your drivers. Cut slots in the lower shelf to fit the driver handles, then glue and nail the station together. Screw the station to a wall near an electrical outlet.
Garden Tool Storage Cubby
Bench-Top Tool Storage Tip
Foam Ball Tool Storage
Panpipe Tool Storage
New Angle on Small Tool Storage
Behind the Door Storage: Tool-Apron Storage
Long-Handled Tool Rack
Eyeglass-case hardware storage
Air Tool Station
PVC Storage Hangers
- Cut and screw together the sides and ends with the ends protruding 1 in. beyond the sides. Drill holes in the top of the ends for a 3/4-in. dowel handle and tap it in the holes before assembling the ends and sides. Drill the 3/8-in. storage holes in the top edges of the sides before assembly.
- Saw 1/4-in. x 1-1/2-in. pine strips for the side slats and screw them to the protruding ends.
- Cut and screw on the 1/4-in. plywood floor.
- Cut 3/8-in. pine partitions and screw them behind the side slats to create custom-width pockets for the tools.