DIY End Grain Router Jig
Make this easy woodworking jig for consistent end grain router cuts.
Save Time with this Simple Jig
The right jig or fixture makes work efficient and produces excellent results. I made this jig to round over the ends of a group of identical parts. Its just a platform with two rails that hold the parts in place. The rails are the same height as the parts. This, along with the dummy part at the end, negates any tear out. Also, on a big roundover like this, dont take it all in one pass. Taking several shallower passes decreases the chance of leaving burn marks on end grain. Christian Frost
Check out some more easy woodworking jigs right here.