DIY Iron Board Holder
Keep your ironing board out of the way with this Handy Hint!
Hang Your Ironing Board
To keep your ironing board out of the way, install a pair of coat hooks on a closet wall. Hold the ironing board against the wall, keeping it off the floor. Then, mark the height and position of the hooks. If you cant find studs to attach the hooks, use drywall anchors that can support the weight of the ironing board.
Say Goodbye to WrinklesDitch the time-consuming iron or handheld steamer to get wrinkles out of a shirt or slacks. Throw a few ice cubes or a wet washcloth in the dryer with your wrinkled clothes. As the ice melts and the water turns to steam, it will remove the wrinkles. This trick isnt as effective with heavier clothing but is a miracle for lighter fabrics. The best part is that you dont have to set the dryer for longer than 10 minutes for it to work.These 20 small laundry room ideas make the most of what little space you have in your laundry or utility room.
Instant Drying RackDoes your family have a lot of clothes that cannot be put in the drier? Even those collapsible drying racks with several bars for draping wet clothes still aren't enough for big laundry days. And if you hang wet clothes on top of wet clothes, it lengthens the dry time significantly and can even leave your clothes smelling a little musty.To fix your air-drying space shortage:
- Grab a 1x2 board from your scrap stash in the garage
- Trim it to fit across a few joists overhead in your basement laundry room.
- Tack it in place with a heavy-duty nail in each joist.
- Then you can air-dry several more pieces of clothing using hangers!