Want more versatility than standard sawhorses can deliver? Support both long and short lumber at the same time or large sheets of plywood.
The Family Handyman
Want more versatility than standard sawhorses can deliver? With these, you can support both long and short lumber at the same time or large sheets of plywood. When youre done, just fold them up for storage.
To build these sawhorses, youll need five 8-ft. 2x4s, a couple of pieces of scrap 1/2-in. plywood, 2-1/2 in. and 1-5/8 in. drywall screws, and a pair of 3-1/2 in. door hinges ($4 each at a home center).
First, cut the 2x4s into eight 32-in. crosspieces, six 24-in. legs and six 6-1/2 in. pieces for the feet. Cut six triangles from the plywood, making them 6-1/2 in. on two sides.
1Next, screw the horizontal pieces into two angle ironshaped crosspieces, then screw a leg on each end of two crosspieces, positioning the legs on opposite sides so the two crosspieces will meet edge to edge when closed. Finally, screw one leg on the remaining crosspieces, then screw on the feet and triangles and attach the crosspieces with the hinges. Thats it. Now you can saw, sand or rout those unwieldy workpieces in comfort. A saddlebag of thanks to reader Ewing Reed for these great plans.