Running Compressed Air Lines in a Shop
Not all pipe can handle high-pressure air
Image Credits:Family Handyman
Choosing the right pipe
First of all, don’t use PVC pipe. If it breaks under pressure, the plastic will shatter and send pieces flying like shrapnel. Use copper instead. It’s available at most hardware stores and home centers. Solder it using the same fittings as you would for water supply lines.
If you don’t want to solder, use galvanized or black steel pipe. Measure the pipe runs and buy exact lengths; hardware stores will cut and thread the ends for you. Unlike gas and water lines, air compression lines don’t require perfect joints, so don’t worry if they leak a tiny bit.
Required Tools for this Project
Have the necessary tools for this DIY project lined up before you start—you’ll save time and frustration.
- Adjustable wrench
- Air compressor
- Air hose
- Soldering torch
- Tube cutter
- Wire brush
Required Materials for this Project
Avoid last-minute shopping trips by having all your materials ready ahead of time. Here’s a list.
- 1/2-in. copper pipe and fittings