Table Saw Worktable

Turn your table saw into an extra work-bench with a piece of 3/4-in. plywood. Wood strips around the plywood make for a snug fit.

Is your shop too small? (Duh, whose isnt?) Takea tip from reader Dan Burbank: Turn your table saw into an extra work-bench with a piece of 3/4-in. plywood. Wood strips around the plywood make for a snug, non-slide t on the metal table. Two cautions: Unplug the saw before using it this way, and make sure the saw blade is cranked below the tables surface.

Check out our favorite table saw tips and techniques.

Popular Videos

table saw worktable