28 Odd But Useful Tips All DIYers Need to Know
Here are 28 clever solutions from our readers and the DIY experts at The Family Handyman.
Citrus Rind Seed Starters
Saw Dust Filter Fan
My workshop doesn’t have air conditioning, and it gets pretty hot while I’m working. I used to blow a fan directly at myself, but it sucked in dust from around the shop and blew it at me. I had a few extra furnace filters lying around, so I tried attaching one to the back of the fan using hook-and-loop fasteners. This made a huge difference! Don’t use a super-high-performance filter, as it could cause the fan to have to work too hard to pull air through, resulting in an overheated motor. — Larry Brannock
No More Smelly Lawn Clippings
Clean your coffee mugs once and for all
Got stubborn coffee stains on a pot, thermos or mug? Denture cleaner is the best solution we’ve ever found for these tough stains.
How to remove coffee stains from a mug or thermos:
- Dissolve one denture cleaning tablet per two cups of hot water.
- Pour it in the stained vessel and let it sit for several hours.
- Then use a scrub brush to clean off the stains and all the loosened bits.
- Pour the solution out and rinse thoroughly.
Check out these 12 clever kitchen hacks you’ve never thought of before.
Extension Cord Tamer
Simple Storage Solution for Longer-Lasting Wood Putty
Wood putty is often a one-time use product for me. Before I even think about using it a second time, it’s dried out. The trick I found was to fill an empty paint can with water and store all my putty jars submerged so no air can get in. Now I can finally say that I have seen the bottom of a putty container. – Kim Boley
Take Your Glue for a Spin
Washing a roller cover between coats of paint is a waste of time and paint. So one of my painting necessities is a can of chips; preferably the plastic cans. Before I start painting, I eat the chips and then clean out the can. I don’t want any unintended texture on my walls! Between coats, I slip the wet roller cover in the empty chip can and pop on the lid to keep it from drying out. — Thomas Nolan.
With a little creativity, many common household items can be transformed into something else that’s entirely different and amazing. Check out 110 extraordinary ways to reuse old items.
Golf Tee Paint Helpers
Healthy Plant Hydration
Water settling at the bottom of pots can lead to root rot. To combat this problem, cut up old sponges and put them in the bottom of the pot. The sponges retain moisture and create necessary air space. They also help prevent water from flushing out the bottom. The sponge acts as a water reserve and keeps soil moist longer.
Love to garden but short on time? Here are some tips that will help you plant, water and weed more efficiently so you have more time to stop and smell your roses.
Right Side Up
Use What You’ve Got
Over the years, I have accumulated quite the collection of caulk guns because I’m always forgetting to bring one along to the job site. This time, I improvised a caulk gun instead of buying yet another one. I zip-tied the tube of caulk to the bar of a trigger-style clamp and stuck a wood scrap in the tube’s end to act as a plunger, dispensing caulk as I squeezed the clamp’s trigger. — Frank McDonough
Use a Ceramic Mug as a Sharpening Stone
The bottom of most ceramic coffee mugs have a flat, unglazed ring that is the perfect surface for giving that dull knife or blade a quick sharpening. And if you find yourself in need of sharpening a utility knife, pocket blade or scissors and don’t have access to a sharpening stone, you can simply flip over a ceramic coffee mug and use the outer edge of the bottom, the non-glazed part, as an emergency sharpening stone.
Just run the blade across the bottom of the mug at a 45-degree angle, working from the one end of the blade to the tip. Next, slide the blade downward in one direction, keeping your fingers out of the way as you work.
This isn’t a perfect solution for continually sharpening your blades, but if you need to quickly sharpen and clean up the edge of a blade this method will do in a pinch. We do recommend eventually investing in a blade sharpening kit.
Now go check out how to sharpen your gardening tools.
No-slip Grab Bar
Zip-Tie Phone Stand
When referencing projects plans or a photo for inspiration while working on a DIY project, most of us use our phones to display images or instructional videos. Our phones don’t prop themselves up, making it difficult to see at the images while working. You can make a smartphone stand out of just about anything these days, but it doesn’t get much simpler than looping zip ties around your phone (1 on each side). All you have to do is tighten the zip ties until they are snug to the phone with the zip-tie heads facing down and near the edge of your phone. Now you can watch video instructions or look at project drawings without having to hold it in your hands the whole time.
Plus, the next time you are charging your phone in the car you better think twice! Learn why you should stop charging your smart phone in your car.
Easier Twisting for Wire Connectors
Lubricate Your Glue Caps and Lids
Caps on certain adhesives/glues, like rubber cement and super glue, have a habit of getting stuck or glued on no matter how hard you try and keep them clean. This can be prevented by simply smearing a little coating of petroleum jelly onto the threads of the tube or lid. You just need a small dab of the petroleum jelly to prevent even more of a mess. Be sure to smear a little bit on before putting the cap back on the glue and it should prevent the cap from cementing on over time. So the next time you go to use your super glue, you’ll be able to open it with ease and get right to work!
You can also get the same effect by spraying a little squirt of WD-40 inside the cap. Check out these 20 brilliant ways to use WD-40.
New Parts For Old Tools
How to Get Dents Out of Wood
Dents in wood surfaces can be annoying. But fret not, they can be fixed!
- Simply soak a washcloth in water and ring it out a bit so it’s not sopping wet.
- Put the damp washcloth on the affected area. The water will wick through the wood, and that’s fine.
- Now, with your iron on its highest setting, place it on the damp washcloth over the affected area, and make small movements back and forth and in circles.
- Press down firmly and continue until your washcloth is dry. It won’t take long to evaporate.
At this point, the wood fibers are absorbing the water and should expand back to where they were originally. Continue this process and repeat by adding more water until the dents rise up to be flush with the rest of the material. Here are more instant fixes for nagging problems around the house.
Replace Baseboard Heater Covers
The Perfect Notch Jig
Here’s a cool trick for cutting a bunch of identical notches without a dado stack. Carefully cut an accurate notch from the end of a board, exactly the same dimension as your desired notch. Attach a clamp board to the other end of the notched board and clamp the assembly to your saw’s fence. Mark the notch location on your workpiece and set the fence. The jig’s end registers the first cut. Slip the workpiece into the notch for the second cut, and then make multiple passes to clear the remaining waste. – Craig Harper. Also check out our table saw tips and techniques here.
Chirping Smoke Detectors
Binder Clips Make Perfect Mini Clamps for Glue-Ups
Glue-ups can be really frustrating if your boards start to wander out of alignment while you apply clamping pressure. If you don’t have any spring clamps to keep the boards aligned, large binder clips will suffice. I keep some near my workbench all the time for just this purpose. – Bill Segura.
Spilled paint on your carpet? Don’t panic, do this:
I used to think dropping a loaded paintbrush on the carpet meant replacing the carpet, until a former foreman told me this little tip. Pour some denatured alcohol onto a rag and scrub away the paint. Use a rag that is as close in color to the carpet, as the alcohol can transfer some of the rag’s color to the carpet. – Tom Gerdowsky
Need some denatured alcohol? Buy it from Amazon here.
Another Way to Remove Popcorn Texture
Use Pegboard to Enlarge Project Plans
Scale plans are often drawn on a grid so you can readily enlarge the original drawing. But enlarging means redrawing the grid to a larger scale—a tedious and time-consuming job. I’ve found a quick way to recreate 1 in. grid with 1/8 in. thick pegboard. Just place the pegboard on your workpiece and center a dot in each hole with a pencil. — Dean St. Clair
Every product is independently selected by our editors. If you buy something through our links, we may earn an affiliate commission.