16 Tips to Get the Best Plywood for Your Buck
16 money-saving plywood tips to help you build better cabinets and furniture. Check out our best tips for getting your project done right.
Best Plywood Options
Building furniture and cabinets is an investment of both time and money. So when you’re buying plywood for these projects, shop wisely. Your choices will have a huge impact on the building process and the results. We’ll help you decide exactly what you need and help you avoid common plywood pitfalls.
Plus, if you’ve been neglecting your garage, it’s time to pay attention and give that hard-working space the makeover it deserves. Check out these 11 Cheap Garage Updates (Plus an Expensive One).
Check for Flatness
Don’t expect perfection—you probably won’t find it. Just try to find the best of the pile. Sight down all the edges just like you’d do if you were buying 2×4 studs. Sometimes, sheets are warped in multiple directions, resembling a potato chip. Leave these for some unlucky, less informed buyer. If you’re buying 1/4-in. plywood, don’t worry about flat and straight; it won’t be either. But you’ll likely fasten it to structural parts, which will keep it flat. Here are some additional tips on finding the right plywood for the job.
Inspect the Edges
Look closely at the core veneers on the edge of the sheet. They should be straight and of uniform thickness and have few, if any, voids. If you see a lot of voids and overlapping core veneers along the edge, there will be more throughout the sheet that won’t be visible until you cut it. Overlapping veneers cause undulations that aren’t visible until after you’ve applied a finish.
Bring a Friend
Plywood in 4 x 8-ft. sheets is heavy and unwieldy. Unstacking, inspecting, restacking, loading and unloading are much easier with an extra set of hands. You can easily move 4 x 8-ft. sheets of plywood by your lonesome with this DIY plywood carrier.
Watch for Buried Treasure
The most beautifully figured face veneers will be at the lumberyard. But when I’m at the home center, I like to check out the back faces of the plywood or even plywood that’s meant for underlayment. Because most people look for consistency of color and grain, there are some striking veneers that get written off as ugly. Quite often, something catches my eye that could be a really cool design element. You’d be amazed at what plywood furniture can look like.
Special Order Plywood From the Home Center
Some home centers will special-order many different species, core options and veneer cuts. But beware: You won’t be able to look at the actual sheets before buying, and you probably won’t be able to return or reject them unless they’re damaged or otherwise unusable. If it’s just that you don’t like the grain pattern, you’re probably stuck with it. This plywood cutting grid might come in handy for you.
Using Stain? Beware of Birch
Any species accepts a clear finish such as polyurethane just fine. But if you’re planning to stain your piece, beware of birch, pine and maple. These species take stain very unevenly and can end up looking blotchy. If you’re set on one of these species, use prestain conditioner, which helps them take stain much more evenly. Even better, look at samples of different species with a clear finish and see if there’s one that has the color you like without stain.
Check out our expert guide for how to identify tree species.
Know the Grading System
Hardwood veneer plywood has a front and a back face and is graded by the quality of each face. The front face is graded using a letter (A–D), with A being the best. The back face is graded using a number (1–4), with 1 being the best. Here’s a good tutorial on plywood grades that goes into some more detail.
Shop the Home Center for Convenience and Savings
Baltic birch is a premium plywood found at lumberyards. A 3/4-in., 5 x 5-ft. sheet has 13 core veneers and costs about $70. Some home centers carry a similar product, called “classic birch.” A 3/4-in., 4 x 8-ft. sheet has 10 core veneers and costs $50 to $60. It’s strong with good screw-holding capability, making it a good, affordable alternative. It’s perfect for less visible cabinet parts, drawers and shelving. As for other plywood, home centers have a more limited selection, carrying mostly veneer core (maybe MDF core), grade B2 and lower. Face veneer cuts are typically rotary cut or plain sliced, and in-stock species will usually be red oak, birch and maple. But the home center is a good option to save a little money.
Don’t Have Plywood Delivered
If you have a way to haul sheets of plywood yourself, do it. The person pulling sheets for delivery isn’t going to handselect the nicest sheets for you. If delivery is your only option, inspect the sheets before the delivery truck leaves and reject any that are damaged or unusable. You may not have the option of rejecting a sheet because you don’t like the grain pattern.
Using Paint? Choose MDF or Birch
For projects I’m going to paint, I like MDF (medium-density fiberboard) or birch. B-grade birch or lower is fine. Sometimes, you’ll even see plywood classified as “paint grade.” Birch is close grained with a smooth texture that doesn’t show through paint. With an open-grained species like oak, the grain is visible under paint. MDF, of course, has no grain pattern, making it a good choice for painted projects. But for structural parts, I like birch veneer. For tips on building with MDF check out our expert guide for using MDF.
Sand at Your Own Risk
All plywood needs at least light sanding before finishing. Sometimes, the face veneer on home center plywood is so thin that the pink veneer adhesive shows through. On several occasions, I’ve had birch veneer turn translucent after light sanding with 220-grit paper. If you suspect that the veneer is ultra thin, don’t use a power sander. Just sand by hand. Check out these 41 genius sanding tips that can help you with other projects.
Shop Lumberyards for Quality and Selection
For a large selection of the best-quality hardwood veneer plywood, visit a lumberyard. A lumberyard that caters to cabinetmakers will give you enough options to make you dizzy. A 4 x 8-ft. sheet will cost anywhere from $80 to $120 or more depending on the species and the cut of the face veneer. Some lumberyards also stock 10-ft. sheets.
There are a few things you should know before heading to the lumber yard. These great tips will help you choose your lumber carefully and spend your money wisely.
Can You Get the Bow Out?
Admit it: You’ve tried flattening sheets of plywood. I have too. I’ve tried weights, clamps, wetting down the concave side, sun drying the convex side and gluing opposing bowed sheets together. Nothing seems to work with any reliability. If the core veneers weren’t in a perfect state of equilibrium and all in harmony when they were bonded together, the sheet has little chance of flattening out. The only recourse is to save the flattest sheets for the largest parts and use the worst sheets in smaller components, minimizing any curvature.
Don’t Just Grab the Top Sheet
Be picky and dig through the pile for the best sheets. Spending extra time to find the flattest undamaged sheets with appealing grain pattern is well worth the effort. But be kind and restack! And take heart; the bottom sheet is usually a bad choice anyway because it’s most prone to forklift damage.
Watch Out for Damage
You can often cut around minor damage in an otherwise good sheet (if you can, you might even be able to get a discount). But sanding out deep dents (above) isn’t an option. You may not be able to sand out stains either. The purple stains shown result from a reaction between oak tannin and steel. Discover the 13 things Home Depot employees won’t tell you, it could lead to some savings.
Best Plywood for Cabinets: Look at the Face Veneers
If only one side of your project will be visible, like a closed cabinet, don’t worry about the back face. If you’re building an open bookcase where both faces are visible, make sure you like the look of both faces.
Check out these 16 Ways to Get Creative with Plywood Furniture.