Save on Pinterest

Clean Garage Floors – Remove Oil Stains From Concrete

Updated: Mar. 05, 2019

A clean garage floor is safer and looks better, too.

FH08SEP_GAROIL_01-2 garage floor cleaner how to get oil off cementFamily Handyman
Remove those garage floor oil and grease stains and make your concrete look good and improve garage safety.

You might also like: TBD

Multiple Days
Less than $20

Overview: How to Get Oil Off Cement

Oil and grease stains don’t just make a garage floor look bad- they can also cause falls, ruin your shoes and get tracked into the house. And if you want to finish your floor with a coating, it’s essential to get rid of oil stains deposits for a good bond. Solvent-based remedies are harmful to the environment and can damage the concrete surface. Cat litter, sawdust and other absorbent materials remove standing oil but do nothing about the oily stain left behind. Commercial and household detergents require a lot of scrubbing and can leave behind residue or discolor the concrete. Here are two product that actually work.

Getting rid of small spots

how to get oil off cement get rid of oil stains

Photo 1: Spread the garage floor cleaner over the stain

To remove oil spots, make sure the concrete is dry and trowel on the Pour-N-Restore garage floor cleaner product 1 in. beyond the stain’s perimeter. Let it dry to a powder, a process that can take eight hours or longer.

how to clean oil stains

Photo 2: Let dry and sweep

Sweep up the powder once it’s completely dry. Then allow all moisture to evaporate completely. If the product is used on sealed concrete, evaporation can take several weeks. If stain remains, repeat the application.

Small spot cleaner

Pour-N-Restore garage floor cleaner product. Good for small spots.

Pour-N-Restore, which combines a citrus degreaser with a non-leaching absorbent, is one option. It’s easy to use and it works well for spot-cleaning smaller stains.

Scrape any standing oil, sand or grit off the spots using a stiff plastic scraper or putty knife and sweep the area clean. Provide good ventilation and wear eye protection, gloves and a dust mask. Spread Pour-N-Restore on the stain with a 1/4-in. notched trowel and let it dry (Photo 1). It can take eight hours or longer to dry depending on the temperature and humidity (for best results, use this product at temps above 60 degrees F). Once it dries to a powder, sweep it up (Photo 2) and throw it into the household trash. Let the moisture from the area evaporate completely, which can take a few days, and the stain should be gone. If the stain remains, reapply the product and scrub it with a push broom or nylon bristle brush. Let it dry, then sweep up the powder and throw it into the trash.

Pour-N-Restore is not recommended for use on asphalt.

Remove stains from larger areas

“Green” degreasing

Use this garage floor cleaner product for large areas. You can safely rinse it into the storm sewer.

Spray Griot’s Oil & Grease Cleaner onto the stain

Spray and wait five minutes before rinsing. If the oil spot has a heavy grease buildup, scrub the spot with a stiff nylon bristle brush (not a wire brush, which can scar the finish) before rinsing.

You can use Griot’s Oil & Grease Cleaner to clean and degrease small spots or your entire garage floor. It worked wonders on our oil stains. And the stuff is so mild that it won’t harm grass or plants and can be safely washed down the storm sewer, making it suitable for use with pressure-washing systems on larger areas. It’s also easy to use: You just spray the liquid on the spot, wait two to five minutes and then spray clean with a hard blast of water. Available at and auto parts stores.

Required Tools for this How to Get Oil Off Cement Project

Have the necessary tools for this DIY project lined up before you start—you’ll save time and frustration.

  • Dustpan
  • Notched trowel
  • Putty knife
  • Safety glasses
You’ll also need a garden hose and nozzle, a broom, a stiff-bristle brush and a spray bottle.