Organize drawers with simple dividers. Use off-the-shelf trim to custom make a system to fit any drawer in an hour.
By the DIY experts of The Family Handyman Magazine
You might also like: TBD
Install DIY drawer dividers
Install dentil molding
Glue dentil molding around the inside of the drawer and slip in dividers. Use additional molding to divide the space further.
Close-up of dentil molding
Dentil molding is available at most home centers and lumber yards.
Heres a fast, inexpensive way to organize a messy drawer.
Cut standard dentil molding the width and length of your drawer, aligning the dentil slots on opposite sides. Glue or brad-nail the strips into placeone strip for dividers up to 2 in., two strips for larger dividers. For drawer dividers, use oak or pine mull strip (sometimes called lattice) or rip 1/4-in. plywood.
Dentil molding and 1/4-in.-thick mull strip are available at most home centers and lumberyards for roughly $1 per foot each (the system we made cost $30). Sand the mull strip smooth with fine sandpaper, then wipe off all the dust. The wood can be left unfinished, or finished before its installed in the drawer.
Required Tools for this Drawer Dividers Project
Have the necessary tools for this DIY project lined up before you startyoull save time and frustration.
Brad nail gun
Hot melt glue gun
Required Materials for this Drawer Dividers Project
Avoid last-minute shopping trips by having all your materials ready ahead of time. Here’s a list.