Check out these simple and sturdy shelf ideas that will help you organize your laundry room, workshop, bathroom, bedroom and garage without spending a lot of money.
By the DIY experts of The Family Handyman Magazine
You might also like: TBD
Laundry organizer shelf ideas
Laundry supply shelf ideas
Make laundry day easier with this shelf for all your detergents, stain removers and other supplies. Build this simple organizer from 1×10 and 1×3 boards. If you have a basement laundry room, you may need to cut an access through the shelves for your dryer exhaust.
Easy-to-build display shelves
Tempered glass and wood shelving ideas
Build this simple display shelf from 1x4s and tempered glass. Secure the short side sections to the 48-in.-long back sections using wood glue and 4d finish nails. Paint the brackets and screw them to the wall. Buy round cornered tempered glass shelves and slide them in place. Build this simple display shelf from 1x4s and tempered glass. Secure the short side sections to the 48-in.-long back sections using wood glue and 4d finish nails. Paint the brackets and screw them to the wall. Buy round cornered tempered glass shelves and slide them in place.
Screw shelf brackets to studs
Store small containers—spray paint, putty cans, glue bottles—right in the wall! Screw shelf brackets (6-ft. lengths cost $1.50 each at home centers) to the studs, then install shelves, cut from standard 1×4 boards, on adjustable clips ($2 for a bag of 12). The boards fit perfectly; there’s no need to saw them to width.
Space shelves to suit your supplies
Make shelves from L-hooks and 2x4s
Panel your shop with pegboard instead of drywall or plywood and there’ll be no shortage of shelving ideas to hang dozens of hand tools, no matter how small your shop is. Home made shelving that’s specifically for pegboard takes the concept one step further. Use 2x4s and 1/4-in. L-hooks to make the shelves. Chamfer the top back edge so the shelf can be tipped in and tighten the L-hooks for a snug fit against the pegboard. Predrill the edges of the 2x4s with a 3/16-in. drill bit about every 6 in., and screw in threaded 2-in. L-hooks to match the holes in your pegboard. These shelves are surprisingly strong and can be sized to fit your specific needs.
Size shelves to fit your needs
Quick-install clothes rod
Attach J-hooks to joists
If you need a clothes rod in the laundry room and you have exposed joists, check out this simple, solid and fast way to get it. Attach 3/4 in. J-hooks (these are typically used for hanging pipe) to the joists and snap a 7/8-in. dowel in the curve.
His-and-hers shower shelving ideas
Hang shower shelves from cabinet knobs
If you need more than shampoo and a bar of soap in the shower, here’s how to provide space for all your vital beauty potions: Get a couple of those shelves that are designed to hang from a shower arm and hang them on cabinet knobs. Use No. 8-32 hanger screws ($1) to screw the knobs into studs or drywall anchors.
Screw knobs into hanger screws
Turn a shelf into a clothes hanger rack
Laundry shelf does double-duty
Sometimes you just need another place to hang clothes, like on the shelf over your washer and dryer. Turn the edge of that shelf into a hanger rack by predrilling some 3/4-in. plastic pipe and screwing it to the edge of the shelf.
Under-joist shelving ideas
Screw wire shelving to joists
Create extra storage space by screwing wire closet shelving to joists in your garage or basement. Wire shelving is see-through, so you can easily tell what’s up there. Depending on the width, wire shelves cost from $1 to $3 per foot at home centers.
Under-bed storage rack
Reuse dishwasher rack
If you’re getting rid of your old dishwasher, hang on to the lower dish rack. Slip it under a bed for convenient roll-out storage.