How to Clean Your Bathtub

Follow these steps to keep your tub sparkling.

Every editorial product is independently selected, though we may be compensated or receive an affiliate commission if you buy something through our links. Ratings and prices are accurate and items are in stock as of time of publication.

Next Project
Time

A few minutes

Complexity

Beginner

Cost

$5–10

Introduction

Who doesn’t like to soak in a nice warm bath? But if the tub hasn’t been cleaned in a while, you may just opt for taking a shower. Here are a few quick bathtub cleaning tips you can schedule in.

Tools Required

  • Rubber gloves
  • Soft Sponge
  • Soft-bristle brush

Materials Required

  • All-purpose spray cleaner
  • Paper towels
  • Window cleaner

Tubs and Suds

  • Most modern bathtubs are made of fiberglass or acrylic, which are beautifully functional but tend to scratch easily. Stay away from abrasive cleaners and scouring pads when cleaning a fiberglass tub. Instead, use a bathroom spray cleaner along with a sponge or soft bristle brush. You can purchase cleaners specially designed to clean fiberglass tubs and showers.
  • Old cast iron tubs have a durable porcelain enamel finish baked on them. Again, stay away from abrasive cleaners and scouring pads – even bleach and white vinegar may dull or yellow the finish. Look for products that say “safe for porcelain.” Make your homemade cleaner with a bucket of warm water, 1/4 cup of ammonia and 1/4 cup of baking soda. Always use a sponge, soft cloth or soft bristle brush.

Project step-by-step (5)

Step 1

Clear the Decks

  • The first thing to do is remove anything that will get in the way of your cleaning project: shampoo bottles, bath salts, candles, bath toys, etc.

Bathtub Clutter

Step 2

Do This After Every Use

  • Before and after every bath, rinse out the tub with hot water. This will ensure that you'll start with a nice clean bath and leave a clean tub for the next person.

Bathtub Rinse

Step 3

Do This Every Few Weeks

  • Routinely clean your tub with all-purpose spray cleaners such as Scrubbing Bubbles Bathroom Grime Fighter or Clorox Disinfecting Bathroom Cleaner. These work well to clean and disinfect your tub.
    • Spray your product of choice onto all surfaces of the tub until it’s thoroughly wet. Let it sit for a few minutes. Thoroughly rinse off the soap with warm water and towel dry to help eliminate water spots.

Bathtub Scrubbing Bubbles

Step 4

Once a Month Deep Cleaning

  • If it's been a while since you’ve cleaned your tub and you have caked on soap scum and limescale deposits, you may need a little extra help and some elbow grease.
    • Again, spray the product of your choice onto all surfaces of the tub until it’s thoroughly wet. Let it sit for a few minutes. Using a sponge and/or soft bristle brush, wash the entire tub. Rinse thoroughly and repeat, if necessary. Then towel dry completely.

Bathtub Scrub Brush

  • For stubborn limescale deposits around faucets and drains, try a 50/50 mixture of calcium, lime and rust remover (CLR) and water. Sponge or spray the CLR solution onto the limescale deposits. Let it work for three minutes, then scrub it with a soft bristle brush, rinsing thoroughly with warm water.

Bathtub Clr

Step 5

Faucets that Sparkle

  • After cleaning and drying the tub, use window cleaner on the faucets to make them shine.
    • Spray the window cleaner onto all the faucet parts and wipe dry with a paper towel.

Bathtub Spout