How to Make a Privacy Screen with Salvaged Closet Doors
Find a few closet doors or tall shutters at your local salvage yard and turn them into a unique, vintage-style privacy screen. Here’s how to do it.
Divide and conquer your living spaces with the help of a privacy screen. This one is made with three old closet doors and four vintage hinges found at a local salvage yard.
You might also like: TBD
Tools & Materials
- Closet doors or tall shutters (3)
- Vintage hinges (4)
- Hinge screws
- Tape measure
Wipe down the doors to remove dust and dirt.
Mark the placement of the hinges on both sides of the middle door. I measured 15 in. from the top and 15 in. from the bottom. For the top hinges, mark where the top edge of the hinges should be placed. For the bottom hinges, mark where the bottom edge of the hinges should be placed.
Use the hinges as a template to mark the screw placement for each hinge. Be sure to align the hinges with the marks at 15 in.
Predrill holes for the screws and screw the hinges to the middle door.
Stand up the middle door and, one at a time, align the outer doors, marking the placement of the screws. Predrill holes for the screws and screw the hinges to the outer two doors.
That’s it, your vintage privacy screen is complete!