Get a better grip on stuck oil filters by adding a strip of coarse sandpaper to your oil filter wrench...or buy a special high-grip wrench.
By the DIY experts of The Family Handyman Magazine
You might also like: TBD
Get a better oil filter grip
Oil Filter Remover: Add grit to get a better grip on a stuck oil filter
Slice a strip of coarse-grit adhesive-back sandpaper and slip it inside a band-style filter wrench. Then remove the adhesive liner and press it into place.
Oil Filter Remover: Get a filter wrench with built-in grip
Slide a Swivel-Gripper filter wrench toward the base of the filter. Rotate the handle to force the grit into the metal. Then swivel the handle and twist off the filter.
Weve all done itovertightened an oil filter so much that its a bear to remove. If you think you can remove it by jamming a long screwdriver through the can and twisting, think again. The screwdriver will just rip the can open and youll be drenched in oil. When youre done dealing with that mess, the filter will still be stuck and youll be even more frustrated.
How to Remove a Stuck Oil Filter
To remove a stuck filter, use a band-type wrench that youve lined with coarse-grit adhesive-back sandpaper (top photo). Or spray adhesive on the back of conventional sandpaper. Better yet, buy a filter wrench with coarse grit welded to the inside of the band (bottom photo). The Lisle Swivel-Gripper No-Slip filter wrenches are available in five sizes and cost about $16. They are available at amazon.com. Slide the filter wrench band all the way down near the base of the filter. Then tighten it and twist.
Required Tools for this how to remove a stuck oil filter project
Have the necessary tools for this DIY project lined up before you startyoull save time and frustration.
Required Materials for this how to remove a stuck oil filter project
Avoid last-minute shopping trips by having all your materials ready ahead of time. Here’s a list.