Repair a drippy ball-type faucet using these pro tricks to deal with stubborn screws. You may have to replace the handle, but not the entire faucet.
By the DIY experts of The Family Handyman Magazine
You might also like: TBD
Kitchen Faucet Repair: Loosen a stuck screw on a single-handle faucet
A single-handle ball-type faucet
If the Allen screw is stuck, or if you strip it so it won’t come out, remove the cap with the handle still in place. You can’t grab the flattened edges with the handle in place. Instead, for this kitchen faucet repair, cushion the jaws of pliers and grip the round edge below.
How to Remove Faucet Handle
If you cant loosen the Allen screw on the handle of a ball-type faucet, dont let that 15 screw force you into a $100 faucet replacement just yet! Normally you have to remove the handle to get the worn rubber seats that cause the drip (Figure A). First try spraying the screw with penetrating oil every day for a week. Then try the screw to see if itll come (Photo). If this doesnt do it, or if you finally strip the head of the Allen screw, try drilling out the screw. Use a bit about the same size as the screw and work carefully. Youll ruin the handle and have to replace it, but its well worth it if you can save the valve. As a final resort, you can actually unscrew the cap with the handle still connected (see Figure A for the parts). This is tricky, because you cant grab the flat edge of the cap, the part thats shaped for the pliers (Figure A). Make sure to cushion the jaws well when you grip the smooth, rounded body of the cap. Use rubber tape, because you cant squeeze the cap too hard. Turn the cap counterclockwise to unscrew it. The assembly you remove will contain the handle, cap, cam, packing and ball (Figure A).
The next challenge is to break the ball from its stem. (The Allen screw clamps onto the stem.) Try grabbing it with the pliers and twisting. The goal is to separate the parts so that you can salvage and reuse the cap. Youll still have to buy a new handle and a repair kit that includes a new ball.
If this kitchen faucet repair doesnt work, the only solution is to replace the entire faucet. This is a tough fix. Good luck!
Figure A: Ball Valve Faucet Parts
Ball-type faucets have these parts. A repair kit will have the key parts to replace to stop drips.
Required Tools for this kitchen faucet repair Project
Have the necessary tools for this DIYkitchen faucet repair project lined up before you startyoull save time and frustration.
Drill bit set
Drill/driver - cordless
Slip joint pliers
Required Materials for this kitchen faucet repair Project
Avoid last-minute shopping trips by having all your materials ready ahead of time. Here’s a list.