How to Revive a Deck

Strip and refinish your deck to make the wood look like new.

Next Project
Time

Multiple Days

Complexity

Beginner

Cost

$51–100

Introduction

Make your weathered old deck look like new. We'll show you the whole refinishing process, with expert tips on how to handle tough spots and complete the job faster.

Tools Required

  • Bucket
  • Paint roller
  • Paint scraper
  • Paint tray
  • Paintbrush
  • Pump sprayer
  • Roller sleeve
  • Safety glasses
  • stiff-bristle brushes

Materials Required

  • Deck finish
  • Deck stripper
  • Painter's tape
  • Plastic sheeting

Bring back the glow: Deck cleaning and staining

Remember how excited you were the day you finished building your new deck? The smell of fresh-cut wood, the warm, even color of the new deck boards, that summer afternoon spent admiring the fine details that made yours the best-looking deck in the neighborhood.

Now five years later, you hardly notice the deck as you amble across it to take out the trash. Yes, the colors have faded, the wood is gray and there may even be some mildew. Well, don’t despair; this is a love affair that’s easily rekindled. It takes just a few days, mild cool weather, some cleaning and stripping solution and a few minor tools to get that old relationship right back where it started. Here’s what you need to know aboutdeck cleaning and staining:

Project step-by-step (9)

Step 1

Look over your deck and test it to find out just what you need to do

Scrape off the stain

Family Handyman

Scrape the old finish residue off your deck railing and decking if you have an old semitransparent or solid color stain. The finish will flake off easily. Don't get bogged down with details; the deck stripper will get the rest. Before you revive a tired-looking deck, look it over to see that all the wood surfaces are sound. If the wood is rotten, a screwdriver will push easily into the wood and the surface fibers will pull away easily. No amount of cleaning is going to bring it back. If you have damaged wood, replace it with new.

Deck cleaning and staining overview

Deck cleaners are formulated to clean a deck surface whether it has a stain or sealer on it or not. However, if you have an old finish that's worn out, the cleaner will do a blotchy job. It'll clean the worn spots differently from the spots that still have finish on them. Look for signs of an old finish line. A stain finish is easy to spot because it leaves signs of wear in high-traffic areas. A sealer is harder to spot, but you can tell if it's worn out because it'll no longer bead water. Old sealers usually will come off with a deck cleaner. Look for a film in areas with lower traffic. If you detect a film, use a stripper on the railing (like we did) to get rid of it before you apply a cleaner. Examine the railing in the same manner as the deck boards.

The deck stripper is designed to lift off the old finish (stain or sealer) and get the surface ready for the deck cleaner to do its work. Save time and stripper solution by first scraping away most of the old finish residue, using an ordinary paint scraper a shown in Photo 1. It may sound daunting, but keep in mind that you don't need to get down to bare wood! Just scrape the surface enough to remove loose, flaky finish. Don't spend more than two hours doing this on an average size (10 x 16-ft.) deck.

The deck we cleaned for this article had all sound wood, but the semitransparent oil finish on the railing was starting to flake off. So we stripped the railings before applying a cleaner. The deck boards, on the other hand, were unfinished, so we used a deck cleaner only. It had been several years since this deck had received any attention, but it cleaned up beautifully.

How to choose deck strippers and cleaners

A deck stripper is used to remove old loose stain and deck sealers, before cleaning and brightening. It breaks the finish loose from the wood like a furniture stripper does. These products also enable you to get rid of an old color and apply a new stain color.

There are basically two types of deck cleaners: One type (liquid oxalic acid or powdered hydrogen peroxide) removes a thin layer of gray, dead wood fibers from the surface and exposes the fresh wood beneath. The other type has a bleach base that removes unsightly black and green stains on the surface such as mildew. If you notice this condition, clean off the mildew first and rinse, then use a standard deck cleaner.

For the best buy, pay attention to the concentration of cleaner in the 1-gallon plastic jug. Some of the cleaners appear to cost more, but on closer inspection, you'll see that the gallon container mixes with water to make 5 gallons of cleaning solution (enough for a large deck).

Expert Tips for How to Build a Deck

Step 2

Get the right tools and safety gear for deck cleaning and staining

Protect your plants

Family Handyman

Cover your plants with plastic sheets once you've soaked them with water. Most strippers and deck cleaners won't ruin your plants but can subject them to unnecessary stress. Even though this deck cleaning and staining project is low-tech, there are a few things you probably need to buy. Get rubber boots and rubber gloves. I like the gloves that cover up the forearms to protect against stripper that splatters and drips. Buy a paint applicator like the one shown in Photo 3 to apply stripper. I've tried brushes and rollers and this tool beats them all. You'll also need a 1- or 2-gallon pump sprayer (buy one specifically for deck cleaners) and a hand-held stiff-bristle nylon scrub brush to scrub the stripper after you apply it. For scrubbing the deck surface, you can use a stiff brush (and I mean stiff!) with a pole handle like the one shown in Photo 7. Also wear safety glasses and old clothes because the stiff bristles of the scrubbing brushes can spit tiny droplets everywhere.

You'll also want to protect any plants surrounding your deck (photo 2). Be sure to remove the plastic soon after cleaning and rinsing so it won't stress the plants.

Skip this job on a hot, sunny day—go to the beach instead

Both strippers and cleaners evaporate rapidly and become ineffective on hot, dry days. A cool, overcast day extends the working time of these solutions. Besides, you'll want to make this messy job as comfortable as you can. This is hard work, so expect to sweat. You can work on the deck in sections (stripping railing sections) over several days if you don't have an eight-hour block of time to do the whole deck.

Trex Decking: Here’s What You Need to Know

Step 3

Keep strippers and cleaners working by keeping them wet

Strip railings first

Family Handyman

APPLY the stripper with a paint applicator or a brush. Keep the surface moist; don't get ahead of yourself. Work only a 6-ft. section of deck railing at a time so the stripper won't evaporate before you can scrub and scrape it. Rebuild an Old Deck With New Decking and Railings

Step 4

Scour the railing

Family Handyman

Scrub loosened finish off the surface with a synthetic stiff-bristle brush. It'll take some muscle to pull the finish loose from the wood.

15 Modern Deck Building Tips and Shortcuts

Step 5

Blast off the gunk

Family Handyman

Rinse the old finish away with a brisk stream of water from your garden hose. You may have to reapply stripper if some finish is left on the wood. You can use a pressure sprayer set at 1,000 psi, but be warned that too much water pressure could ruin the soft fibers of the wood. We had excellent results with a spray nozzle and regular water pressure.

How to Build a Cedar Deck Railing With Glass

Step 6

Clean the deck

Family Handyman

Spray the deck surface with deck cleaner the day after you've completed the railing. Also apply the deck cleaner to the railing with a sprayer, because the stripper may have darkened the wood. The cleaner will bring the stripped surfaces back to a fresh, bright wood look.

14 DIY Deck Add-Ons That are Seriously Cool

Step 7

Scrub the deck

Family Handyman

Scrub away the loose wood fibers and residue 15 minutes after you've applied the cleaner. Work the brush deeply into the wood in the direction of the grain. As soon as you're finished, rinse the deck thoroughly with a firm spray from your garden hose and let the surface dry for at least two days. Insects and spiders are about the only things I've seen that'll stay put on a vertical surface. In contrast, strippers run down vertical surfaces easily. The only way to keep the stripper in contact with the wood is to constantly go back with your applicator and smear the stuff to the top, as shown in Photo 3.

You only need to keep the stripper in contact with the wood for 15 minutes, then scrub and rinse as shown in Photo 5.

Mix your cleaner according to the directions on the container. Many deck cleaners are concentrated and require additional water. Stir the mixture with a clean piece of wood and put the top back on. Pump the sprayer until you feel resistance (usually about 25 pumps or so). Then grab the wand and spray the solution on the deck surface (Photo 6). Wait about 15 minutes before you start to scrub (Photo 7). After scrubbing, flush the surface with your garden hose sprayer until the deck looks clean. It's best to work small sections at a time as shown in Photo 6; otherwise, the solution will dry before you get a chance to scrub the surface with a stiff brush.

31 Tips for Repairing, Updating and Maximizing Your Deck

Step 8

Apply a quality finish to protect your deck

Stain the railing

Family Handyman

Brush your stain onto the railings. Cover your deck boards with tape and plastic to catch the drips. We recommend a semitransparent oil stain. Solid color stains have heavy pigment that'll be tough to renew the next time you refinish the deck.

How to Build a Platform Deck

Step 9

Seal the deck

Family Handyman

Roll on your decking sealer with a roller. We used a clear finish with just a bit of amber tone to warm the color of the decking. If you have tightly spaced deck boards, use a brush to get between them (a couple of boards at a time) as you roll. Let your deck dry for a couple of days before applying a sealer or stain. For our deck railing, we applied a semitransparent oil stain mixed to match the siding of the house. We brushed it on (Photo 8) and carefully cut in around the deck boards. We didn't want a colored stain on the deck boards, so we applied a clear finish/sealer (Photo 9). This finish looked great and gave the decking a warm, fresh look. Avoid using stain on the deck boards because they quickly show wear.

Keep an eye on your deck and be prepared to clean and reseal it every couple of years. The longer you wait, the more weather-related damage can occur.

Dream Deck Plans