Magnetic Toothbrush HolderUpdated: Jun. 05, 2019
Clear up toothbrush clutter
You might also like: TBD
- An hour or less
Building a better toothbrush holder
Photo 1: Glue the magnets
Mark the position of the magnets and glue them on the mounting strip, orienting the magnets so they attract each other.
Battery-powered toothbrushes don’t fit in toothbrush holders and end up lying on a wet, messy countertop.
Mount neodymium (“rare earth”) magnets on a Corian mounting strip with Super Glue. Glue the strip to the wall with Super Glue or clear silicone caulk.
Tools and materials:
To make the mounting strip, cut a Corian threshold (available at tile stores and home centers) with a miter saw or jigsaw. Neodymium magnets are available from internet suppliers (search “neodymium magnets”). We used 1/2-in. x 2-in. x 1/8-in. magnets, grade N42 (the higher the grade, the stronger the magnet). You can double them up if you need more holding power.
Neodymium magnets are incredibly strong but break if handled roughly. Order several more than you need—shipping is expensive. Also, don’t handle neodymium magnets if you wear a pacemaker, and never leave them next to your computer or credit card. For more safety information, search “neodymium magnet safety” on the internet.
Make Any Toothbrush Stick
Battery-powered toothbrushes have hidden steel parts that stick to magnets. Mount standard toothbrushes by adding a tiny screw or metal washer to the back.
Required Tools for this Project
Have the necessary tools for this DIY project lined up before you start—you’ll save time and frustration.
- 4-in-1 screwdriver
- Caulk gun
- Cordless drill
- Miter saw
Required Materials for this Project
Avoid last-minute shopping trips by having all your materials ready ahead of time. Here’s a list.
- #4 x 3/8-in. screw
- Corian threshold
- Masking tape
- Neodymium magnets
- Silicone caulk
- Super glue