Save on Pinterest

Retrofit a Miter Saw With a Laser

Add a laser guide to a miter saw in five minutes

FH08JAU_RETSAW_01-3Family Handyman
Install an accurate laser cutting guide on your miter saw in five minutes. It's a cool add-on.

You might also like: TBD

Add a laser cutting guide to your miter saw

Close-up of a laser cutting guide

Replace the outer blade washer with a laser cutting guide for more accurate cuts on your circular or miter saw.

Photo by Bill Zuehlke

If you’ve seen those laser cutting guides on miter saws and wonder if you can add one to your old saw, take heart. It’s possible, and not terribly expensive. The guide fits alongside the blade, replacing the outer washer. When the saw starts running, the guide shoots a laser beam that shows exactly where the blade will cut.

Quarton makes a product called the Infiniter Laser Cutting Guide, which fits on most miter saws and circular saws. Three small replaceable alkaline batteries provide the power. The centrifugal force of the saw blade automatically starts the laser, so you see the beam as soon as you pull the trigger. Rockler sells the guide (rockler.com; check the Web site to make sure the guide will work for your saw). I installed it on my miter saw in less than five minutes. The blade cut exactly on the laser mark.

Required Tools for this Project

Have the necessary tools for this DIY project lined up before you startyoull save time and frustration.

  • Miter saw blade wrench